DI-POLE ANTENNA 9DB
Omni directional antenna that can fit directly on to a VideoMittter
- Fit to the TX and RX
- Up To 300mts Range
- Learn More
- How It Works
- What's Included
- Recommended Accessories
- Resources & Flyers
- Ask the Expert
Wirefree transmission is a superb way to get around difficult on-site issues and adding a pair of antennas to a system can give superb results with “clear line of sight” transmission distances of over 1KM. The Videomitter range of antennas work on frequencies between 2400-2480Mhz and are ideal for use with the wirefree MIT-KIT video and audio transmitters but can also be used with other compatible devices such as wirefree network equipment.
Antennas are available with direct or indirect connections and in various gains and styles there is a model to suit most installations. Please use our key below to select the right one for your needs. For best results antennas should be bought and fitted in matching pairs with one at each end.
Measured in decibels (dBi), the gain of an antenna describes its ability to convert power into radio waves and vice versa depending whether it is used at the transmitting or receiving end of the signal. Depending on the environment, in general the higher the gain the better the performance over long distances.
Antenna’s Directional Ability
Omni: works in all directions and usually in a pole style.
Semi-Directional: often a panel style so easy to fit to a flat wall.
Directional: provides a highly focussed directional signal and tends to be in the satellite dish style known as parabolic and this is more conducive to producing and receiving this type of signal.
Direct or Indirect Connection:
Direct connection antennas are usually smaller in size and connect straight into a socket on your transmitter or other device. They are great for shorter ranges and internal use.
Indirect connection antennas are more flexible but require a lead between the transmitter and the antenna. Although this means the antenna needs mounting independently it offers the flexibility to route the interconnecting lead through the eaves of a building to install the antenna on the outside of the property. In some buildings where metal cladding or foil backed plasterboard can deaden a signal, this can greatly enhance results. This range of antennas have an N socket and leads to connect them to the MITKIT range are available in 0.2, 1, 2,3 and 5M lengths codes CON902,CON910,CON912,CON915 respectively.
The AER535 antenna is…
- 9dBi gain (Max unobstructed range of 300M)
- Omni Directional
- Pole Design H395mm
- Direct Connection
- With a 15 deg vertical spread and omni-directional horizontal spread
This AER535 model allows the TX & RX to be enclosed in a small external enclosure with this antenna mounted on top of an ABS box such as the BOX420 for a professional look and to allow full installation flexibility and ease of mounting on the outside of buildings.
Please wait... Loading
Please wait... Loading
LEAD 0.2M N-CONN TO RP-SMA MALE
LEAD 0.5M N-CONN TO RP-SMA MALE
LEAD 1M N-CONN TO RP-SMA MALE
LEAD 2M N-CONN TO RP-SMA MALE
LEAD 5M N-CONN TO RP-SMA MALE
- DI-Pole Antenna
Don't forget to view our Recommended Accessories on the next tab.
It contains items essential, handy or that can enhance the features of your CCTV system!
Our CCTV Experts will make every attempt to respond to your questions as quickly as possible.
If your Question is urgent please ring us on 01246 200 000, and ask for Sales.
We are available Monday-Friday from 8.45am till 6.00pm