IP Mule IP Over Co-ax Tx & Rx Pair

IP Mule IP Over Co-ax Tx & Rx Pair

CCTVMule
SKU:
IP-MULE
Availability:
Usually ships the same or next day
(No reviews yet)

Send IP Camera Signals Down Co-ax, CAT5/6 or Alarm Cable, makes impossible installations easy!

  • Easy to Expand Existing Systems
  • Long Distance Transmission
  • Quick and Easy Installation
  • Multiple IP Camera Transmission

Simply connect an IP Mule to either end of the cable and you get a network created from one end to the other! It can be used for IP cameras or any other network device you want to connect.

Current Stock:
Description

A pair of IP Mules - Send IP cameras down CO-AX, alarm cable and telephone cable! The IP Mule doesn't mind!

Simply connect an IP Mule to either end of the cable and you get a network created from one end to the other! It can be used for IP cameras or any other network device you want to connect.

There is no complex set up at all, just set one mule to be the TX and set the other to be an RX.

You can even send multiple IP cameras down the one cable using multiple IP Mules, the only limiting factor is the cable type you are using limits the bandwidth available (See table A). So for example 300m of RG59 has a maximum bandwidth of 100 Mbps. This would allow up to 100/5 = 20 x 1.3MP IP-cameras or 10 x 2MP IP-cameras. Cable quality can vary tremendously so this is only a guide.

All the IP Mules are identical, each having a switch on it to make it in to either a TX (Transmitter) or an RX (Receiver). You can buy the mules in singles or pairs depending on your requirements. For single IP Mules see product code IP-TX101.

Typical Cable Runs

  Co-ax (RG59) CAT5/6 Telephone Alarm
300m 100 Mbps 78 Mbps 65 Mbps 60 Mbps
600m 90 Mbps 65 Mbps 55 Mbps 50 Mbps
1200m 78 Mbps 60 Mbps 35 Mbps 35 Mbps
1500m 50 Mbps 40 Mbps 25 Mbps 25 Mbps
2000m 30 Mbps 25 Mbps 15 Mbps 10 Mbps

Connection of the IP Mule

Specifications
+ —
  IP-MULE
Bandwidth 100Mbps Max (See Table A)
Max Cable 2000m (2km)
Input Power 12V DC
Input Current 250mA (Per Unit)
Power Connection 2.1mm DC Socket
PSU Required (1x Per Unit)
Input Connection Tx - RJ45 / Rx - BNC
Output Connection Tx - BNC / Rx - RJ45
Mount Wall Mount
Build Aluminium
Dimensions 111mm(L) x 64mm(W) x 24mm(D)
Downloads
Additional Information
Device:
Converter
Type:
IP
Network Accessory:
Converter